Product ID:TIONA 336
MSDS Date:08/01/1987
FSC:8010
NIIN:00N031243
MSDS Number: BPJVS

SCM CHEMICALS

7 ST PAUL STREET
BALTIMORE, MD 21202
US

Emergency Phone: 301-783-1120

Info Phone: 301-783-1120; 301-355-3600

Preparer: J.H. BLAKER

Cage: 46343

SCM CHEMICALS

BALTIMORE, MD 21202 US

Telephone: 301-783-1120;301-931-4570

Cage: 46343

SILICA GEL; (AMORPHOUS SILICA)

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: <10%

OSHA PEL 6 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

ALUMINUM OXIDE; (ALPHA-ALUMINA) (SARA III)

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: <6%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

TITANIUM OXIDE; (TITANIUM DIOXIDE) (MFR CAS# 1317-80-2)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 80-97%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

LD50 LC50 Mixture:LD50:(ORAL,RAT)>9000 MG/KG.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:INERT NUISANCE DUST. TEMPORARY
DRYING EFFECT OR IRRITATION OF MUCOUS MEMBRANES MAY RESULT FROM
EXCESSIVE EXPOSURE. SKIN:NON-CORROSIVE; NON-IRRITATING;
NON-SENSITIZING; MAY HAVE DRYING EFFECT. EY E:INERT FOREIGN BODY
HAZARD ONLY. INGEST:HARMLESS, PHYSIOLOGICALLY INERT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES:FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES.
SKIN:WASH W/WATER & MILD SOAP. INHAL:REMOVE TO FRESH AIR. INGEST:
NO TREATMENT REQUIRED. MATERIAL IS COMPLETELY ELIMINATED THROUGH GI
TRACT IN ABO UT 24 HOURS.

Flash Point:NON-FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:USE ANY FEASIBLE MECHANICAL MEANS - BROOM,
BRUSH, SCOOP, VACUUM OR WET ABSORBENT MATERIAL, BUT AVOID DUSTING
DURING CLEAN UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NIOSH/MSHA APPROVED DUST RESPIRATOR IF TLV IS OR
MAY BE EXCEEDED.
Ventilation:LOCAL EXHAUST, IF REQUIRED TO MAINTAIN AIRBORNE
CONCENTRATION BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH:5.5-8.5.

HCC:V7
Melt/Freeze Pt:M.P/F.P Text:3326F,1830C
Spec Gravity:3.7-4.2(H2O=1)
pH:SUPDAT
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE, TASTELESS, ODORLESS POWDER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:THIS PRODUCT WHEN SPILLED CAN BE DISPOSED OF
INTO SANITARY LANDFILL OR INDUSTRIAL WASTE DISPOSAL LANDFILL.
PLEASE REVIEW APPROPRIATE FEDERAL, STATE & LOCAL INDUSTRIAL WASTE
DISPOSAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.